MARTIN Thrill Mini Profile


Thrill Mini Profile - Moving Heads Imagine having the ability to integrate the moving beams of light, shine spotlights when and where you need them, or add the dramatic effect of colors and “gobos” flying around the audience during your live sho...

Availability: In Stock


Thrill Mini Profile - Moving Heads

Imagine having the ability to integrate the moving beams of light, shine spotlights when and where you need them, or add the dramatic effect of colors and “gobos” flying around the audience during your live shows. Now you can with the THRILL Mini Profile, Martin professional’s smallest and most affordable moving head to date. THRILL Mini Profile has been designed to help DJs, musicians and entertainers take their performances to the next level–whether they’re in a lounge bar or pub, at a wedding, or high-energy dance floor. 

The THRILL Mini Profile delivers super-sharp optics with over 800 lumens of output via an 18-watt white LED engine. Eight varied gobos and eight vibrant colors are available, with electronic strobe/dimming, manual focus, and high-speed pan and tilt. The eye-catching effects can be synchronized to a music beat via an audio trigger or run from the four pre-programmed shows. For more custom control options, it can also be operated via DMX. 

Despite performing above its class, this ultra-compact fixture weighs only 4.3 kg (9.5 lb.), so it’s easy to transport and set up. Its lightweight design, rugged exterior, and compact form factor make THRILL Mini Profile the perfect fit for on-the-go entertainers, DJs, venues, and home enthusiasts that require professional, lighting within their reach. 

  1. Portable, lightweight, and easy to control
  2. Profile-style fixture for gobo projection
  3. Super sharp optics and powerful LED engine punch above its class  


  • 18 W, white LED engine
  • Dynamic effects include electronic dimming and strobe
  • 8 static gobos for mid-air break-ups and projections
  • 8 vibrant dichroic color filters
  • Ultra-smooth and fast pan/tilt
  • Easy to operate standalone sound-activated and master/slave control methods
  • 4 professionally pre-programmed shows
  • DMX operable for individualized control and design
  • Includes bracket for hanging or surface mount
  • Common IEC power mains inlet - mains cable included 


Length: 237 mm (9.3 in.)
Width: 155 mm (6.1 in.)
Height: 338 mm (13.3 in.)
Height with hanging bracket: 362 mm (14.25 in.)
Weight: 4.3 kg (9.5 lbs.)

Color wheel: 8 colors plus open, variable and random rotation
Static gobo wheel (stamped): 8 static gobos plus open, variable and random rotation
Strobe: Variable from 3 - 20 Hz, pulse effects and random strobe
Electronic dimming: 0 - 100%, four dimming curve options
Pan: 540 deg
Tilt: 230 deg

Control options: DMX, 4 stand-alone shows, master/slave
DMX channels: 10
Stand-alone trigger options: Sound-trigger, auto-run
User interface: Control panel with backlit LCD display
DMX compliance: ANSI E1.11 - USITT DMX512-A

Light source: 18 W white LED engine
Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
Beam angle: 14 degrees
Focus: Manual
*Figure obtained under manufacturers test conditions

Color: Black
Housing: High-impact flame-retardant thermoplastic
IP rating: IP 20

Orientation: Standing or hanging
Mounting points: Bracket for single rigging clamp, M12 or ½
Location: Dry locations only
Minimum distance to illuminated surfaces: 200 mm (8 in.)
Minimum distance to combustible materials: 100 mm (4 in.)
Minimum clearance around fans and vents: 100 mm (4 in.)

AC power in/thru: IEC male inlet, C14
DMX data in/out: 3-pin and 5-pin locking XLR

AC power: 100-240 V nominal, 50/60 Hz
Fuse: T 2.0 A, 250 V

110 V, 60 Hz: 52 W, 0.9 A
230 V, 50 Hz: 50 W, 0.4 A
Typical half-cycle RMS inrush current: Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

Cooling: Forced air (temperature-regulated, low noise)
Maximum ambient temperature (Ta max.): 40deg C (104deg F)
Minimum ambient temperature (Ta min.) 0deg C (32deg F)
Total heat dissipation (calculated, +/- 10%) at full intensity, full white 180 BTU/hr.

EU safety: EN 60598-2-17, EN 61000-3-3, EN 62471, EN 62493
EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61547
US safety: UL 1573
US EMC: CFR Title 47 Part 15 Class A
Canadian safety: CSA C22.2 No. 166
Canadian EMC: ICES-003 Class A
Australia/NZ (pending): RCM

+ Included Items
- Power cable, EU, IEC C13 female, molded Schuko, 1.9 m (6.3 ft.)
- Power cable, US, IEC C13 female, molded NEMA 5-15P, 1.9 m (6.3 ft.)
- Bracket and hardware for rigging clamp attachment

+ Accessories/Installation hardware
P/N 91602018: Super lightweight half coupler, black
P/N 91604006:Safety cable, SWL 60 kg (132 lb.), BGV C1/ DGUV 17, black
Related Products
MARTIN Thrill Vertical Fogger, EU

MARTIN Thrill Vertical Fogger, EU